3-Way Garden Hose Splitter, Heavy-Duty Brass, 3/4" GHT, (Black)

3-Way Garden Hose Splitter, Heavy-Duty Brass, 3/4" GHT, (Black)

NICKEL-PLATED ONE-PIECE CAST BRASS BODY —This 3 way hose splitter made from premium heavy-duty solid brass and formed as one integrated casting, the hose splitter has fewer joints and potential weak points than multi-piece designs. The rigid one-piece body helps withstand water pressure, reduce potential leak paths, and resist cracking, loosening, and deformation during repeated use—supporting reliable, long-term outdoor durability. Nickel plating adds surface protection to help resist corrosion and tarnishing while maintaining a clean, durable finish. EXTRA-WIDE SPACING FOR LARGE TIMERS — Turn one outdoor faucet into 3 independently controlled watering lines without crowding bulky equipment together. The 6.5" wide garden hose splitter provides 1.77" of spacing between each outlet, giving large irrigation timers, hose fittings and quick-connects the clearance they need for a cleaner, easier multi-zone watering setup. HIGH-FLOW INTERNAL WATER PATH — Designed with a 0.63" inlet passage and 0.47" ball-valve openings to help reduce unnecessary flow restriction through the manifold. The wide internal water path supports demanding watering setups with garden hoses, sprinklers, irrigation timers, and drip systems. Under controlled laboratory testing at 218 psi, one fully open outlet measured approximately 15.8 GPM. 90° STRAIGHT-DOWN OUTLET DESIGN — All 3 outlets point straight down instead of spreading outward like an angled Y-style splitter. This layout lets attached timers, hoses and fittings hang in a more natural direction, helps keep multiple water lines organized around the faucet, and helps reduce sideways pull on connected fittings. 2.1" LONG HANDLES & INDEPENDENT VALVES — Each outlet features its own 2.1" extra-long metal shutoff handle for added leverage, a larger grip area, and easier on/off control. All 3 valves operate independently, allowing you to control each watering line separately without disconnecting the others—ideal for managing multiple watering zones from one outdoor faucet. LAB-TESTED FOR PRESSURE, PULL & TORQUE — The assembled manifold was tested under controlled laboratory conditions to verify its strength under demanding loads. It remained intact during repeated water-pressure testing up to 435 psi (3 MPa), tensile-load testing up to 30 kN, and torque testing up to 120 N·m. Together, these tests provide measurable evidence of the strength and durability of the one-piece brass body, inlet connection, valves, and sealing structure. OUTDOOR DURABILITY & INSTALLATION NOTICE — The valve assembly was laboratory-tested from -4°F to 176°F and showed no cracking or leakage under the specified test conditions. In freezing weather, shut off the upstream water supply and fully drain the manifold to help prevent freeze damage inside the valve body. At approximately 1.29 lb, this heavy-duty solid brass hose splitter requires a sturdy, well-supported outdoor faucet; installation on plastic faucets is not recommended.